📧 [email protected] 📞 +86 157 2539 2877  |  WhatsApp: +86 151 0669 1214

Products / Electronics

Ultrapure Water Equipment for Electronics

High-purity water treatment equipment for electronics and microelectronics — SS membrane housings, precision filters, reusable sintered stainless cartridges and DI/EDI feed polishing for semiconductor and PCB rinse water, factory-direct from Shandong Ningchuan.

Ultrapure Water Equipment for Electronics
MANUFACTURER DIRECT

High-Purity Filtration Equipment for Electronics-Grade Ultrapure Water

Shandong Ningchuan manufactures high-purity filtration and water-treatment equipment for the electronics industry, where ultrapure water (UPW) must be free of particles, ions and organics down to trace levels. Our SS membrane housings, precision filters and reusable sintered stainless cartridges are used in the polishing trains that feed EDI, DI and final rinse loops.

In semiconductor, PCB and display manufacturing, even sub-micron particles or leached ions can ruin a batch. That is why the final polishing stages use inert, cleanable stainless steel hardware and tightly rated cartridges that do not shed fibres or release extractables into the water.

We supply matched pressure vessels, cartridges and membranes, and can tailor nozzle layout, material (SS316L) and end-cap formats (222 / 226) to your UPW skid. Send us your flow rate, resistivity target and particle spec and we will size the polishing train.

  • SS316L / SS304 vessels, low-extractable, cleanable
  • Final polishing for UPW, DI and EDI feed water
  • Reusable sintered stainless cartridges — no fibre shedding
  • Tight 0.1 – 20 µm ratings for particle control
  • 222 / 226 end caps to match common UPW housings
  • RO / UF membrane housings for the front of the train
  • Low dead-leg, orbital-welded hygienic design
  • Built to drawing with export documentation
Request a Quote 💬 WhatsApp
Electronics Ultrapure Water Equipment — Typical Specifications
MaterialSS316L / SS304, low-extractable finish
Filtration stageRO/UF → EDI/DI → final particle polish
Cartridge rating0.1 – 20 µm (sintered SS / PES / PTFE)
End caps222 / 226 standard for UPW housings
Membrane size4040 / 8040 RO and UF elements
Particle controlSub-micron, fibre-free media
ConnectionsTri-clamp / flange to skid spec
SealsEPDM / PTFE / FKM (low-extractable)
DesignLow dead-leg, orbital-welded
CertificatesMaterial cert on request

Specifications above are our standard range. Custom sizes, materials, ports and pressure ratings are available — please send your working conditions for a tailored offer.

Options

Equipment We Supply for Electronics

From RO front-end to final polish

💡

RO / UF Membrane Housings

SS pressure vessels for the front of the UPW train that remove ions and organics before EDI / DI.

🔬

Precision Polishing Filters

Final particle-control filters that protect rinse loops and keep water within spec.

💧

Sintered SS Cartridges

Reusable, fibre-free stainless cartridges for high-purity and high-temperature duty.

⚡

Sterile Storage Tanks

Sanitary buffer tanks for UPW and DI water with low-extractable contact surfaces.

APPLICATIONS

Electronics & Microelectronics Applications

  • Semiconductor and wafer rinse water
  • PCB and IC substrate cleaning
  • LCD / OLED display manufacturing
  • Solar cell and photovoltaic process water
  • EDI / DI feed-water polishing
  • Laboratory and metrology pure water

Not sure which model fits your project? Send us your flow rate, liquid and filtration requirement — our engineers will recommend the right configuration, free of charge.

Get Free Selection Advice
Ningchuan factory workshop in Linyi, Shandong
FAQ

Frequently Asked Questions

Common questions from overseas buyers about ultrapure water equipment for electronics — click a question to expand.

Why use stainless steel for ultrapure water polishing?

Stainless steel housings and reusable sintered cartridges are inert and cleanable, so they do not shed fibres or release extractables into the water the way some disposable media can. That makes them a good fit for the final polishing stages of an UPW train.

Can you match the 222 / 226 end-cap formats we use?

Yes. Our high-flow and precision cartridges are built to the common 222 / 226 end-cap and O-ring standards used in UPW housings, so they interchange with widely used designs.

Do you supply the membrane housings for the front of the train?

Yes. We supply SS304 / SS316L membrane housings for 4040 and 8040 RO and UF elements that sit ahead of EDI / DI, as well as the final polishing filters.

What particle ratings are available?

We offer 0.1 – 20 µm pleated, melt-blown and sintered stainless steel media, so you can set the exact cut-off your rinse or EDI feed loop requires.

Can you build to our skid drawing?

Yes. We manufacture to your drawing — nozzle layout, material (304 vs 316L), end caps and surface finish — and supply material certificates and export documentation.

What is your MOQ and lead time?

Trial orders from 1 piece are accepted. Standard items are typically 10–20 working days; custom housings and skids take 20–35 working days. Send your flow rate and particle spec for a quote.

Related

Related Products

Stainless Steel Membrane Housing

Stainless Steel Membrane Housing

Sanitary SS304/SS316 membrane housings for 4040 & 8040 RO and UF elements.

View Details →
4040 RO Membrane

4040 RO Membrane

Reverse osmosis membrane element with high salt rejection for clean, safe water.

View Details →
Stainless Steel Filter Cartridge

Stainless Steel Filter Cartridge

Reusable sintered stainless steel cartridge for demanding duty.

View Details →
Precision (Cartridge) Filter Housing

Precision (Cartridge) Filter Housing

Stainless steel precision filter housing as security filtration before RO.

View Details →
Stainless Steel Sterile Water Tank

Stainless Steel Sterile Water Tank

Sanitary stainless steel sterile water tank for purified water storage.

View Details →