Products / Filter Elements
The 40 inch high flow cartridge filter is designed for high-volume water treatment systems. Its large-flux structure delivers low pressure drop and fewer housing requirements, reducing overall system cost while maintaining fine filtration.
| Length | 40 inch (1016 mm) |
|---|---|
| Media | Large-flux pleated / high-flow filtration media |
| Micron rating | 1 / 5 / 10 / 20 micron available |
| Pressure drop | Low — fewer cartridges needed per vessel |
| Housing compatibility | Standard 40 inch high flow housings |
Typical specifications shown. Sizes, materials and connections can be customised — send us your duty conditions and we will confirm the exact model.
See the full specifications, options, applications and buying FAQ on our manufacturer page — or send your duty conditions for a factory-direct quote.
View High Flow Filter Cartridge Manufacturer → Request a QuoteCommon questions about the 40" High Flow Cartridge Filter — click a question to expand.
Choose a high flow (large-flux) cartridge when flow is high or space and change-out labour are constrained. A single 40-inch large-flux element replaces a full rack of standard 2.5-inch cartridges, so you need far fewer housings, less piping and fewer element changes.
Use 1–5 µm for RO security filtration, 0.5–1 µm for finer polish, or 10–50 µm for heavier sediment loads. If you send your flow rate and the particle size to be removed, we will recommend the rating and element count.
We supply PP melt-blown, pleated PP/PES/PTFE and sintered stainless steel media, with 222/226 O-ring end caps and EPDM/NBR/Viton/silicone seals. Standard 40-inch length; 20-inch variants on request.
Sanitary SS304/SS316 membrane housings for 4040 & 8040 RO and UF elements.
View Details →
Reverse osmosis membrane element with high salt rejection for clean, safe water.
View Details →
Pleated filter element with high dirt-holding capacity for RO pre-filtration.
View Details →